Главная » Каталог » C » Страница 3
Автор: Tonich от 13-02-2020, 16:48

High-performance DisplayPort Gen2 2 : 1 multiplexer

CBTL06DP212 1. General description CBTL06DP212 is a high performance multi-channel Generation 2 multiplexer meant for DisplayPort (DP) v1.2, v1.1a

Автор: Tonich от 13-02-2020, 16:48

Third generation high-performance DisplayPort multiplexer

1. General description CBTL06DP213 is an NXP third generation high-performance multi-channel multiplexer, meant for DisplayPort (DP) v1.3

Автор: Tonich от 13-02-2020, 16:48

Second-generation high performance general purpose switch

CBTL06GP213 1. General description The CBTL06GP213 is a six-channel (�hex’) multiplexer for DisplayPort, HDMI and PCI Express applications

Автор: Tonich от 13-02-2020, 16:48

USB Type-C High performance Crossbar Switch IC

CBTL08GP053 1. General description CBTL08GP053 is a USB Type-C High Performance Crossbar Switch IC meant to be used for Type-C connector interface high

Автор: Tonich от 13-02-2020, 16:48

11-bit DDR2 SDRAM MUX/bus switch with 12 Ohm ON resistance

CBTU4411 11-bit DDR2 SDRAM MUX/bus switch with 12 О© ON resistance 1. General description This 11-bit bus switch is designed for 1.7 V to 1.9 V VDD operation and SSTL_18 select input levels. Each Host

Автор: Tonich от 13-02-2020, 16:48

12-bit bus switch/multiplexer for DDR4-DDR3-DDR2 applications

CBTV24DD12A is designed for 1.8 V/2.5 V/3.3 V supply voltage operation and it supports Pseudo Open Drain (POD), SSTL_12, SSTL_15 or SSTL_18 signaling and CMOS select input levels. This device

Автор: Tonich от 13-02-2020, 16:48

14-bit bus switch/multiplexer for DDR2/DDR3/DDR4 applications

CBTW28DD14 1. General description This 14-bit bus switch/multiplexer (MUX) is designed for 1.5 V or 1.8 V supply voltage operation

Автор: Tonich от 13-02-2020, 16:48

CM3120, IO-Link Master Transceiver - Data Sheet

The CM3120 is an IO-Link master physical layer dedicated to the industrial market.

Автор: Tonich от 13-02-2020, 16:48

CRTOUCHDS, CR Touch - Data Sheet - Data Sheet

The CRTOUCH is a Ready PlayВ® solution device designed to serve as a four wire and five wire resistive touch driver and a capacitive touch sensing device in a single 32-pin QFN package

Автор: Tonich от 13-02-2020, 16:48

High-performance multi-protocol NFC frontend CLRC663 and CLRC663 plus

The CLRC663 multi-protocol NFC frontend IC supports the following operating modes • Read/write mode supporting ISO/IEC 14443 type A and MIFARE Classic communication mode • Read/write mode supporting