Fault-tolerant CAN transceiver
TJA1054A 1. General description The TJA1054A is the interface between the protocol controller and the physical bus wires in a Controller Area Network (CAN
Fault-tolerant CAN transceiver
TJA1054A 1. General description The TJA1054A is the interface between the protocol controller and the physical bus wires in a Controller Area Network (CAN
TJA1100 - 100BASE-T1 PHY for Automotive Ethernet – Datasheet
TJA1100 100BASE-T1 PHY for Automotive Ethernet 1. General description The TJA1100 is a 100BASE-T1 compliant Ethernet PHY optimized for automotive use cases. The device provides 100 Mbit/s transmit
TSOP26326 IR Receiver Modules for Remote Control Systems--Data sheet
The TSOP362.. series are miniaturized SMD-IR receiver modules for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
30 Mbits/s up to 3.2 Gbits/s A-Rate fiber-optic receiver
TZA3012HW 30 Mbit/s up to 3.2 Gbit/s A-Rate fiber-optic receiver 1. General description The TZA3012HW is a fully integrated optical network receiver containing a dual limiter, data and clock recovery
30 Mbit/s to 3.2 Gbit/s A-rate(tm) 4-bit fibre optic transceiver
TZA3015HW 30 Mbit/s to 3.2 Gbit/s A-rate(TM) 4-bit fibre optic transceiver DATA SHEET Preliminary specification Supersedes data of 2003 Oct 06 2003 Dec 16 INTEGRATED CIRCUITS TZA3015HW 30 Mbit/s
SDH/SONET STM1/OC3 transimpedance amplifier
TZA3036 1. General description The TZA3036 is a transimpedance amplifier with Automatic Gain Control (AGC), designed to be used in STM1/OC3 fiber optic
Hybrid (analog and digital) Silicon Tuner for terrestrial and cable TV reception
TDA18273HN 1. General description The TDA18273HN is a high performance Silicon Tuner designed for terrestrial
TC80310, Alternator Regulator with LIN - Data Sheet
The 80310 is an integrated circuit intended to regulate the output voltage of an automotive alternator.
Cable pre-processor and low-power silicon tuner
TDA18204HN 1. General description TDA18204HN is a cable pre-processor coupled with a low-power silicon tuner to address the front-end part of cable